การเทรดเบรกเอาต์ (Breakout Trading)Breakout Trading
เข้าเทรดเมื่อราคาหลุดกรอบหรือแนวสำคัญ วิธีวางคำสั่ง SL และเป้า การลื่นไถลของราคา และการรับมือกับเบรกหลอกที่เกิดบ่อยEntering when price escapes a range or key level — order placement, stops and targets, slippage, and handling the frequent false breakouts.

ในบทความนี้ · 7
In this article · 7
การเทรดเบรกเอาต์ (Breakout Trading) คือการเข้าเทรดเมื่อราคาทะลุกรอบที่สะสมพลังมาระยะหนึ่ง หรือทะลุแนวรับแนวต้านสำคัญ ด้วยความคิดว่าเมื่อราคาออกจากกรอบได้ มักวิ่งต่อไปอีกช่วงหนึ่ง เบรกเอาต์เป็นจุดเริ่มต้นของเทรนด์ใหญ่หลายครั้ง แต่ก็เป็นที่มาของ "เบรกหลอก" ที่ทำให้นักเทรดติดกับดักได้บ่อยพอ ๆ กัน
เบรกเอาต์คืออะไร
ราคามักสลับระหว่างช่วงสะสม (ออกข้าง กรอบแคบ ความผันผวนต่ำ) กับช่วงขยายตัว (วิ่งแรง ความผันผวนสูง) นักเทรดเบรกเอาต์พยายามจับจังหวะตอนเปลี่ยนจากช่วงแรกไปช่วงที่สอง รูปแบบที่ใช้บ่อยได้แก่
- กรอบสี่เหลี่ยม: ราคาวิ่งระหว่างแนวรับกับแนวต้านที่ชัดเจน (แนวรับแนวต้าน)
- รูปแบบสามเหลี่ยมหรือธง: กรอบที่แคบลงเรื่อย ๆ ก่อนเบรก
- จุดสูง/ต่ำของวันหรือของช่วงเอเชีย: เช่น ลอนดอนเบรกเอาต์
- ระดับสำคัญ: จุดสูงสุดในรอบหลายเดือน หรือตัวเลขกลม
สองวิธีเข้าไม้
- เข้าทันทีที่เบรก: ตั้งคำสั่ง Buy Stop เหนือกรอบ หรือ Sell Stop ใต้กรอบ เมื่อราคาวิ่งผ่านคำสั่งจะทำงานเอง ข้อดีคือไม่พลาดไม้ที่วิ่งแรง ข้อเสียคือโดนเบรกหลอกบ่อยกว่า และเสี่ยงการลื่นไถล
- รอรีเทสต์: รอให้ราคาเบรกแล้วกลับมาทดสอบขอบกรอบเดิมก่อนเข้า (เบรกแล้วรีเทสต์) ได้ราคาดีกว่าและกรองเบรกหลอกบางส่วน แต่จะพลาดไม้ที่วิ่งไปเลยไม่กลับมา
ทั้งสองวิธีไม่มีแบบไหนดีกว่าในทุกกรณี ขึ้นกับตลาดและการทดสอบของแต่ละคน ดูภาพด้านล่าง
SL และเป้าหมาย
- SL: วางกลับเข้าไปในกรอบ เช่น กลางกรอบหรือขอบอีกฝั่ง ถ้ากรอบกว้างมาก กลางกรอบเป็นทางเลือกที่ประหยัดกว่า
- เป้า: ที่ใช้กันบ่อยคือ "ระยะเท่าความสูงกรอบ" (Measured Move) วัดจากจุดเบรก หรือใช้แนวถัดไป หรือ Trailing Stop ถ้าคาดว่าเป็นจุดเริ่มเทรนด์
- ตัวกรองความผันผวน: บางคนเทรดเฉพาะเมื่อกรอบแคบกว่าค่า ATR ปกติ เพราะการสะสมที่แน่นมักตามด้วยการขยายตัว แต่ไม่ได้รับประกัน
สมมติกรอบอยู่ที่ 1.0850–1.0900 (สูง 50 pip) ตั้ง Buy Stop ที่ 1.0905 SL ที่ 1.0870 (ห่าง 35 pip) เป้า 1.0955 (50 pip จากจุดเข้า) ยอมเสีย 1% = $10 ล็อต = $10 ÷ (35 × $10) = 0.0286 ปัดลงเป็น 0.02 ล็อต ความเสี่ยง 35 × $0.20 = $7 เป้า 50 × $0.20 = $10 ถ้าราคากระชากแล้วคำสั่งทำงานที่ 1.0908 (ลื่นไถล 3 pip) SL กลายเป็น 38 pip = $7.60 และเป้าเหลือ 47 pip = $9.40 อัตรากำไรต่อความเสี่ยงลดจาก 10 ÷ 7 ≈ 1.43 เหลือ 9.40 ÷ 7.60 ≈ 1.24 จากการลื่นไถลแค่ 3 pip
เหมาะกับใคร
- เวลา: ใช้คำสั่งรอได้ จึงไม่ต้องเฝ้าจอตลอด แต่ควรอยู่ตอนช่วงตลาดเปิดที่เบรกมักเกิด
- นิสัย: รับการโดนเบรกหลอกติดกันได้ และไม่ไล่ราคาที่วิ่งไปแล้วไกล
- ขนาดบัญชี: ทำได้ทุกขนาด ถ้าคำนวณล็อตจากระยะ SL ทุกครั้ง
- ต้นทุน: ช่วงเบรกมักเป็นช่วงที่ราคาเร็ว สเปรดและการลื่นไถลจึงสูงกว่าปกติ
จุดอ่อน / ข้อผิดพลาดที่พบบ่อย
- เบรกหลอก (False Breakout): ราคาหลุดกรอบนิดเดียวแล้วกลับเข้ามา ทำให้โดน SL ซ้ำ ๆ (เบรกหลอก) เป็นต้นทุนที่ระบบเบรกเอาต์ต้องจ่ายเสมอ
- ไล่ราคา: เห็นราคาวิ่งไปแล้ว 40 pip ค่อยเข้า ทำให้ SL ไกลและเป้าที่เหลือน้อย
- การลื่นไถลตอนข่าว: เบรกที่เกิดจากข่าวแรงอาจทำให้คำสั่งทำงานที่ราคาแย่มาก
- วาดกรอบผิด: ปรับเส้นกรอบให้เข้ากับทุกแท่งไส้ยาว ทำให้กรอบไม่มีความหมาย ควรใช้กรอบที่ชัดจนคนส่วนใหญ่เห็นตรงกัน
- อัตราชนะต่ำ: ระบบเบรกเอาต์มักแพ้บ่อยกว่าที่คิด ต้องพึ่งไม้ชนะที่ใหญ่พอ จึงต้องมีความคาดหวังเป็นบวกหลังต้นทุน
- เบรกในช่วงตลาดเงียบ: เบรกตอนสภาพคล่องต่ำมักไม่มีแรงตาม
หลายคนรอให้แท่งเทียนบนกราฟที่ใช้ปิดนอกกรอบก่อน แทนที่จะเข้าตอนราคาแค่แตะผ่าน วิธีนี้ช้ากว่าแต่ช่วยกรองการเบรกด้วยไส้เทียนได้บางส่วน
ใช้บนมือถือ
บนมือถือ ตั้งคำสั่ง Buy Stop/Sell Stop พร้อม SL/TP ล่วงหน้าเป็นวิธีที่สะดวกที่สุด เพราะไม่ต้องกดทันในวินาทีที่ราคาวิ่ง ถ้ามีคำสั่งสองฝั่ง (ทั้งเหนือและใต้กรอบ) อย่าลืมลบอีกฝั่งเมื่อฝั่งหนึ่งทำงาน แอปส่วนใหญ่ไม่ลบให้อัตโนมัติ
สรุป
- เบรกเอาต์คือการเข้าเมื่อราคาออกจากกรอบสะสมหรือทะลุแนวสำคัญ
- เลือกได้ระหว่างเข้าทันที (Buy/Sell Stop) กับรอรีเทสต์ ทั้งสองมีข้อแลก
- SL กลับเข้าไปในกรอบ เป้าใช้ระยะเท่าความสูงกรอบหรือแนวถัดไป
- เบรกหลอกและการลื่นไถลเป็นต้นทุนประจำของสไตล์นี้
- คำนวณล็อตจากระยะ SL จริงทุกครั้ง และเผื่อการลื่นไถล
Breakout trading means entering when price escapes a range it has been building, or pushes through a key support or resistance level, on the idea that once price leaves the range it tends to keep going for a while. Breakouts are where many big trends start — and they are also where "false breakouts" trap traders just as often.
How breakout trading works
Price tends to alternate between contraction (sideways, narrow range, low volatility) and expansion (strong, fast, high volatility). A breakout trader tries to catch the switch from the first to the second. Common setups:
- Rectangle ranges: price moving between clear support and resistance (support and resistance).
- Triangles or flags: a range that keeps narrowing before it breaks.
- The day's or the Asian session's high/low: for example the London breakout.
- Key levels: multi-month highs or round numbers.
Two ways to enter
- Enter on the break: place a buy stop above the range or a sell stop below it, so the order triggers as price moves through. You never miss a strong move, but you get caught by more false breaks and face slippage.
- Wait for the retest: let price break, then come back to test the old edge before entering (breakout and retest). You get a better price and filter some false breaks, but you miss moves that never come back.
Neither is better in every case; it depends on the market and your own testing. See the chart below.
Stops and targets
- Stop: back inside the range — the middle or the opposite edge. If the range is wide, the middle is the cheaper choice.
- Target: commonly a "measured move" equal to the range height, measured from the break; or the next level; or a trailing stop if you expect a new trend.
- Volatility filter: some traders only trade when the range is narrower than the usual ATR, because tight contraction is often followed by expansion — often, not always.
Suppose the range is 1.0850–1.0900 (50 pips tall). Buy stop at 1.0905, stop loss at 1.0870 (35 pips), target 1.0955 (50 pips from entry). Risk 1% = $10. lot = $10 ÷ (35 × $10) = 0.0286, rounded down to 0.02 lot. Risk 35 × $0.20 = $7; target 50 × $0.20 = $10. If price spikes and the order fills at 1.0908 (3 pips of slippage), the stop becomes 38 pips = $7.60 and the target only 47 pips = $9.40. Reward-to-risk falls from 10 ÷ 7 ≈ 1.43 to 9.40 ÷ 7.60 ≈ 1.24 from just 3 pips of slippage.
Who it suits
- Time: pending orders mean you need not watch constantly, but being around at session opens, when breaks often happen, helps.
- Temperament: can take several false breaks in a row and does not chase price that has already run.
- Account size: any size, as long as the lot is calculated from the stop distance every time.
- Costs: breakouts happen when price is fast, so spread and slippage are higher than usual.
Weaknesses and common mistakes
- False breakouts: price pokes out of the range and comes straight back, stopping you out again and again (false breakouts). It is a permanent cost of breakout systems.
- Chasing: entering after price has already run 40 pips, which leaves a far stop and little target.
- Slippage on news: a break caused by a big release can fill you at a much worse price.
- Drawing the range wrong: bending lines to fit every wick makes the range meaningless. Use ranges clear enough that most people would draw them the same way.
- Low win rate: breakout systems often lose more often than people expect and rely on winners being large enough, so expectancy after costs must be positive.
- Breaks in quiet hours: breaks during low liquidity often have no follow-through.
Many traders wait for a candle on their chart to close outside the range instead of entering on a mere poke through. It is slower, but it filters some wick-only breaks.
On a phone
On a phone, placing buy stop / sell stop orders with stop and target in advance is the most practical method — you do not have to tap in time during the spike. If you place orders on both sides of the range, remember to delete the other one once one triggers; most apps do not do it for you.
Summary
- Breakout trading enters when price leaves a contraction range or breaks a key level.
- Choose between entering on the break (stop orders) and waiting for a retest; both have trade-offs.
- Stops go back inside the range; targets use the range height or the next level.
- False breaks and slippage are a standing cost of the style.
- Size every trade from the real stop distance, and allow for slippage.

