ATR วัดความผันผวนเพื่อวาง SL และคำนวณล็อตATR (Average True Range)
เข้าใจ True Range และ ATR ใช้ ATR วาง Stop Loss ตามความผันผวน คำนวณขนาดไม้ และทำ Trailing Stop รวมถึงสิ่งที่ ATR บอกไม่ได้Understand True Range and ATR, and use ATR to set volatility-based stops, size positions and trail stops, plus what ATR cannot tell you.

ATR (Average True Range) เป็นอินดิเคเตอร์ของ J. Welles Wilder ที่ไม่ได้บอกทิศทางเลย มันบอกอย่างเดียวว่า "ปกติราคาแกว่งกี่จุดต่อแท่ง" ฟังดูธรรมดา แต่สำหรับการบริหารความเสี่ยง ATR เป็นหนึ่งในเครื่องมือที่มีประโยชน์ที่สุด เพราะช่วยให้ SL ไม่แคบจนโดนกวาดง่าย และไม่กว้างจนเสี่ยงเกินตัว
ATR คืออะไร
เริ่มจาก True Range (TR) ของแต่ละแท่ง คือค่าที่มากที่สุดใน 3 ค่านี้:
- สูงสุด − ต่ำสุด ของแท่งนี้
- |สูงสุดของแท่งนี้ − ราคาปิดแท่งก่อน|
- |ต่ำสุดของแท่งนี้ − ราคาปิดแท่งก่อน|
ข้อ 2 และ 3 มีไว้นับ "ช่องว่างราคา (Gap)" ด้วย เช่น ราคาเปิดกระโดดหลังวันหยุด
ATR คือค่าเฉลี่ยแบบเรียบของ TR ย้อนหลัง N แท่ง ค่าเริ่มต้นคือ 14 หน่วยของ ATR เป็นหน่วยราคา เช่น ทองคำเป็นดอลลาร์ EURUSD เป็นทศนิยม (แปลงเป็น pips ได้)
แท่ง H1 ของทองคำ: สูงสุด 2,015 ต่ำสุด 2,003 ราคาปิดแท่งก่อน 2,000
- 2,015 − 2,003 = 12 2) |2,015 − 2,000| = 15 3) |2,003 − 2,000| = 3
TR = ค่ามากสุด = 15 (เพราะแท่งนี้เปิดกระโดดขึ้นจากราคาปิดเดิม)
เทรดเดอร์ใช้ ATR อย่างไร
1. วาง SL ตามความผันผวน
แทนที่จะใช้ SL ตายตัว เช่น 10 ดอลลาร์ทุกไม้ ให้ใช้ SL = ATR × ตัวคูณ ตัวคูณที่พบบ่อยคือ 1.5–3 วันที่ตลาดเหวี่ยง SL จะกว้างขึ้นเอง วันที่เงียบ SL จะแคบลงเอง ดูเพิ่มที่ การวาง Stop Loss
2. คำนวณขนาดไม้
ล็อต = เงินที่ยอมเสีย ÷ (ระยะ SL × มูลค่าต่อจุดต่อ 1 ล็อต)
เมื่อ SL กว้างขึ้นตาม ATR ล็อตจะเล็กลงอัตโนมัติ ทำให้ความเสี่ยงเป็นเงินเท่าเดิมทุกไม้ ดู การคำนวณขนาดไม้
3. Trailing Stop แบบ ATR
ตัวอย่างที่รู้จักกันคือ Chandelier Exit: สำหรับไม้ซื้อ SL = ราคาสูงสุดตั้งแต่เข้า − 3 × ATR เลื่อนขึ้นอย่างเดียว ไม่เลื่อนลง ดูภาพด้านล่าง
4. ตัวกรองสภาพตลาด
ATR ต่ำผิดปกติ = ตลาดเงียบ เบรกเอาท์มักไม่ไปไกล ATR สูงผิดปกติ = ตลาดเหวี่ยง ควรลดล็อตหรือพัก
ATR 14 บน H1 = $12 ใช้ SL = 1.5 × ATR = 1.5 × 12 = $18 บัญชี $2,000 ยอมเสีย 1% = $20 ล็อต = 20 ÷ (18 × 100) = 0.0111 → ปัดลงเป็น 0.01 ล็อต (ล็อตขั้นต่ำ) ความเสี่ยงจริง = 18 × 0.01 × 100 = $18 (0.9% ของพอร์ต)
สังเกต: ถ้า ATR พุ่งเป็น $30 SL = $45 ที่ 0.01 ล็อตจะเสียได้ $45 = 2.25% เกินแผน 1% → บัญชีเล็กควรข้ามไม้นั้น เพราะลดล็อตต่ำกว่า 0.01 ไม่ได้
จุดอ่อน / ข้อผิดพลาดที่พบบ่อย
- ATR ไม่บอกทิศทาง — ATR พุ่งขึ้นได้ทั้งตอนราคาขึ้นแรงและลงแรง อย่าอ่านว่า "ATR สูง = ขาขึ้น"
- ตามหลังเหตุการณ์ — ATR 14 เป็นค่าเฉลี่ย พอข่าวใหญ่ออก ATR ยังไม่ทันสะท้อนความผันผวนใหม่ทันที SL ที่คำนวณก่อนข่าวอาจแคบเกินไป
- ลืมเรื่องสเปรด — ช่วงตลาดเปิด/ปิดหรือข่าว สเปรดกว้างขึ้น SL แคบ ๆ ตาม ATR บน M1–M5 อาจโดนเพราะสเปรดอย่างเดียว ดู สเปรด สว็อป ค่าคอมมิชชั่น
- ใช้ ATR คนละกรอบเวลา — ATR ของ H1 กับ D1 ต่างกันมาก ต้องใช้ ATR ของกรอบเวลาที่ใช้เข้าเทรดหรือที่ใช้วาง SL จริง
- ตัวคูณที่ปรับจนพอดีกับอดีต — 1.7 × ATR ที่ดูดีที่สุดในข้อมูลเก่า อาจไม่ดีในอนาคต ใช้ค่ากลม ๆ แล้วทดสอบหลายช่วงเวลา
การขยาย SL ตาม ATR โดยไม่ลดล็อต คือการเพิ่มความเสี่ยงต่อไม้แบบไม่รู้ตัว
ใช้บนมือถือ
MT4/MT5 มือถือ: แตะ f → Oscillators → Average True Range ค่าจะแสดงเป็นตัวเลขมุมหน้าต่างอินดี้ จดค่า ATR ก่อนเปิดไม้ แล้วใช้เครื่องคิดเลขในโทรศัพท์คำนวณล็อตตามสูตรด้านบน ถ้าอยากดูว่าราคาเคยวิ่งสวนก่อนไปถึงเป้ามากแค่ไหนในอดีต ลองใช้ เครื่องมือวิเคราะห์ภาพกราฟ
สรุป
- ATR = ค่าเฉลี่ยของ True Range บอกขนาดการแกว่งปกติ ไม่บอกทิศทาง
- ใช้วาง SL เป็นตัวคูณ ATR (มักใช้ 1.5–3) ให้ SL ปรับตามสภาพตลาด
- SL กว้างขึ้น = ล็อตต้องเล็กลง เพื่อคุมเงินที่เสี่ยงต่อไม้ให้คงที่
- ใช้ทำ Trailing Stop และกรองช่วงตลาดเงียบ/เหวี่ยงได้
- ระวังช่วงข่าวและสเปรด ATR ปรับตัวไม่ทัน
ATR (Average True Range), another J. Welles Wilder creation, says nothing about direction. It tells you only one thing: how far price typically moves per candle. That sounds plain, but for risk management ATR is one of the most useful tools you have, because it keeps your stop from being so tight it gets swept, or so wide it puts too much at risk.
How it works
Start with the True Range (TR) of each candle, which is the largest of these three values:
- This candle's high − low
- |this candle's high − previous close|
- |this candle's low − previous close|
Items 2 and 3 make sure gaps count, such as a jump at the open after a weekend.
ATR is a smoothed average of TR over N candles; the default is 14. ATR is expressed in price units: dollars for gold, decimals for EURUSD (convertible to pips).
A gold H1 candle: high 2,015, low 2,003, previous close 2,000.
- 2,015 − 2,003 = 12 2) |2,015 − 2,000| = 15 3) |2,003 − 2,000| = 3
TR = the largest = 15 (because this candle gapped up from the prior close)
How traders use ATR
1. Volatility-based stops
Instead of a fixed stop such as $10 on every trade, use stop = ATR × multiplier. Common multipliers are 1.5–3. On wild days the stop widens by itself; on quiet days it tightens. See Stop-loss placement.
2. Position sizing
lot = money at risk ÷ (stop distance × value per point per 1.00 lot)
When the ATR stop gets wider, the lot gets smaller automatically, so the money at risk stays the same on every trade. See Position sizing.
3. ATR trailing stops
A well-known version is the Chandelier Exit: for a long, stop = highest high since entry − 3 × ATR, moved up only, never down. See the chart below.
4. Market-condition filter
Unusually low ATR = quiet market where breakouts often fizzle. Unusually high ATR = wild market where it may be wise to cut size or sit out.
ATR 14 on H1 = $12. Stop = 1.5 × ATR = 1.5 × 12 = $18. Account $2,000, risking 1% = $20. Lot = 20 ÷ (18 × 100) = 0.0111 → rounded down to 0.01 lot (the minimum). Actual risk = 18 × 0.01 × 100 = $18 (0.9% of the account).
Note: if ATR jumps to $30, the stop becomes $45 and 0.01 lot risks $45 = 2.25%, above the 1% plan. A small account should skip that trade, because it cannot go below 0.01 lot.
Weaknesses and common mistakes
- ATR has no direction — it rises in both sharp rallies and sharp sell-offs. "High ATR = uptrend" is wrong.
- It lags events — ATR 14 is an average. When big news hits, it takes time to reflect the new volatility, so a stop calculated just before the news may be too tight.
- Forgetting the spread — around session opens/closes and news, spreads widen. A tight ATR stop on M1–M5 can be hit by the spread alone. See Spread, swap and commission.
- Mixing timeframes — H1 ATR and D1 ATR are very different. Use the ATR of the timeframe you actually trade and place stops on.
- Curve-fitted multipliers — a 1.7× ATR that looked best on old data may not hold up. Use round numbers and test across several periods.
Widening your stop with ATR without reducing the lot quietly increases your risk per trade.
On a phone
MT4/MT5 mobile: tap f → Oscillators → Average True Range; the value shows in the corner of the indicator window. Note the ATR before you open a trade and use your phone's calculator with the formula above. To see how far price historically moved against an entry before reaching a target, try the chart analysis tool.
Summary
- ATR = average True Range; it measures typical movement, not direction.
- Set stops as a multiple of ATR (often 1.5–3) so they adapt to the market.
- Wider stop = smaller lot, keeping money at risk constant.
- Useful for trailing stops and for filtering quiet versus wild conditions.
- Watch out around news and spread spikes; ATR adjusts too slowly.
