Parabolic SAR จุดหยุดและกลับตัวที่วิ่งตามราคาParabolic SAR
เข้าใจสูตร SAR ตัวเร่ง (AF) และจุดสุดขั้ว (EP) ใช้ SAR เป็น Trailing Stop และสัญญาณกลับข้าง และรู้ว่าทำไมมันพังในตลาดไซด์เวย์Understand the SAR formula, the acceleration factor and extreme point, use SAR as a trailing stop and flip signal, and see why it breaks down in ranges.

ในบทความนี้ · 6
In this article · 6
Parabolic SAR (Stop And Reverse) เป็นอีกผลงานของ J. Welles Wilder ที่ออกแบบมาเพื่อตอบคำถามว่า "ควรเลื่อน Stop ไปที่ไหน" มันวาดเป็นจุดเล็ก ๆ ใต้ราคาในขาขึ้น และเหนือราคาในขาลง จุดเหล่านี้จะขยับเข้าหาราคาเร็วขึ้นเรื่อย ๆ เมื่อเทรนด์ไปต่อ และเมื่อราคาแตะจุด ระบบจะ "หยุดและกลับข้าง" ทันที
Parabolic SAR คืออะไร
สูตรของจุดถัดไป:
SAR ถัดไป = SAR ปัจจุบัน + AF × (EP − SAR ปัจจุบัน)
- EP (Extreme Point) = ราคาสูงสุดที่ทำได้ในขาขึ้นนี้ (หรือต่ำสุดในขาลง)
- AF (Acceleration Factor) = ตัวเร่ง เริ่มที่ 0.02 เพิ่มทีละ 0.02 ทุกครั้งที่ทำ EP ใหม่ สูงสุดไม่เกิน 0.20
- ค่าเริ่มต้นใน MT4/MT5: Step 0.02, Maximum 0.2
- เมื่อราคาแตะ SAR → SAR สลับไปอีกฝั่ง และเริ่มนับ AF ใหม่ที่ 0.02 โดยใช้ EP ของขาก่อนเป็นจุดเริ่ม
ยิ่งเทรนด์ไปไกลและทำจุดสูงใหม่บ่อย AF ยิ่งโต จุด SAR จึงไล่ตามราคาแบบเส้นโค้ง (Parabolic) ตามชื่อ ดูภาพด้านล่าง
ทองคำขาขึ้น SAR = 1,980 EP = 2,000 AF = 0.02 SAR ถัดไป = 1,980 + 0.02 × (2,000 − 1,980) = 1,980 + 0.4 = 1,980.4
สมมติแท่งต่อมาทำ High ใหม่ที่ 2,010 → EP = 2,010 และ AF เพิ่มเป็น 0.04 SAR ถัดไป = 1,980.4 + 0.04 × (2,010 − 1,980.4) = 1,980.4 + 0.04 × 29.6 = 1,980.4 + 1.184 ≈ 1,981.58 สังเกตว่าเมื่อ AF โตขึ้น SAR จะขยับเข้าหาราคาเร็วขึ้นเรื่อย ๆ
เทรดเดอร์ใช้ SAR อย่างไร
- บอกทิศทางปัจจุบัน — จุดอยู่ใต้ราคา = ฝั่งซื้อ จุดอยู่เหนือราคา = ฝั่งขาย
- Trailing Stop — ใช้ค่า SAR เป็นจุดเลื่อน SL ของไม้ที่ถืออยู่ ดู Trailing Stop ข้อดีคือ SL ขยับเองตามสูตร ไม่ต้องใช้ความรู้สึก
- สัญญาณกลับข้าง — จุดสลับฝั่งเป็นสัญญาณให้ปิดไม้เดิม (และในระบบแบบดั้งเดิม เปิดไม้ฝั่งตรงข้าม)
กฎเข้าออกแบบทั่วไป
เพราะ SAR อยู่ในตลาด "ตลอดเวลา" ตามแบบดั้งเดิม ซึ่งเจ็บมากในไซด์เวย์ เทรดเดอร์ส่วนใหญ่จึงใส่ตัวกรอง:
- ใช้ตัวกรองเทรนด์ เช่น ADX เหนือ 25 หรือราคาอยู่เหนือ EMA 200 ดู ADX และ DMI
- เข้าซื้อเมื่อ SAR สลับมาอยู่ใต้ราคาในทิศเดียวกับตัวกรอง
- SL เริ่มต้นที่ค่า SAR ตอนเข้า
- เลื่อน SL ตาม SAR ทุกแท่ง ปิดเมื่อราคาแตะ SAR
- ไม่กลับข้างทันที ถ้าตัวกรองยังไม่ยืนยันอีกฝั่ง
EMA 200 ชี้ขึ้น SAR สลับมาอยู่ใต้ราคา เข้าซื้อ 1.0850 SAR ตอนเข้า = 1.0825 → SL 25 pips ใช้ 0.08 ล็อต (1 pip = $0.80) → ความเสี่ยง 25 × 0.80 = $20 บัญชี $2,000 = 1% ราคาวิ่งขึ้นไป SAR ไล่ตามขึ้นไปถึง 1.0880 แล้วราคาย่อแตะ SAR ไม้ถูกปิดที่ 1.0880 กำไร = 30 pips × 0.80 = $24 (ยังไม่หักสเปรดและค่าคอมมิชชั่น)
จุดอ่อน / ข้อผิดพลาดที่พบบ่อย
- พังในตลาดไซด์เวย์ — ราคาแกว่งแตะ SAR ทั้งสองฝั่งสลับกัน ถ้ากลับข้างทุกครั้งจะขาดทุนติดกันหลายไม้ นี่คือจุดอ่อนใหญ่ที่สุด
- SL ใกล้เกินไปในเทรนด์ที่ยาว — เมื่อ AF ใกล้ 0.20 จุด SAR ไล่ชิดราคามาก การย่อปกติก็ทำให้โดนปิดก่อนเทรนด์จบ
- SAR ตอนเข้าอาจไกลมาก — หลังสลับข้าง SAR เริ่มจาก EP ของขาก่อน ซึ่งอาจอยู่ไกลจากราคา ทำให้ความเสี่ยงต่อไม้สูง ต้องคำนวณล็อตจากระยะจริง
- ปรับ Step ตามอารมณ์ — Step เล็กลง (เช่น 0.01) ทำให้ SAR ช้าลง ถือไม้ได้นานขึ้นแต่คืนกำไรมากขึ้น Step ใหญ่ขึ้นทำกลับกัน ไม่มีค่าไหนดีทุกตลาด
- มองข้ามช่องว่างราคา — ราคาเปิดกระโดดข้ามจุด SAR ได้ SL จริงอาจแย่กว่าค่า SAR
การกลับข้างทุกครั้งที่ SAR สลับ ทำให้คุณอยู่ในตลาดตลอดเวลา รวมถึงช่วงไซด์เวย์ที่ไม่มีความได้เปรียบ หลายคนจึงใช้ SAR แค่เป็นจุดออก ไม่ใช่จุดเข้า
ใช้บนมือถือ
MT4/MT5 มือถือ: แตะ f → Trend → Parabolic SAR ค่า Step 0.02 Maximum 0.2 แตะค้างที่จุดใกล้แท่งล่าสุดเพื่ออ่านค่า แล้วเลื่อน SL ในไม้ที่ถืออยู่ด้วยมือ (แอปมือถือไม่เลื่อน SL ตาม SAR ให้เอง)
สรุป
- SAR = จุดที่วิ่งตามราคา สูตร SAR + AF × (EP − SAR) AF 0.02–0.20
- จุดใต้ราคา = ฝั่งซื้อ เหนือราคา = ฝั่งขาย แตะจุด = หยุดและกลับข้าง
- เหมาะที่สุดกับการใช้เป็น Trailing Stop ในตลาดเทรนด์
- พังในไซด์เวย์ ต้องมีตัวกรองเทรนด์ และไม่จำเป็นต้องกลับข้างทุกครั้ง
- SL ตอนเข้าอาจไกล ต้องคำนวณล็อตจากระยะจริง
Parabolic SAR (Stop And Reverse), another J. Welles Wilder design, was built to answer one question: where should my stop go? It plots small dots below price in an uptrend and above price in a downtrend. As the trend continues, the dots close in on price faster and faster, and when price touches a dot, the system stops out and reverses.
How it works
Next dot:
next SAR = current SAR + AF × (EP − current SAR)
- EP (extreme point) = the highest high of the current up-leg (or lowest low of a down-leg).
- AF (acceleration factor) starts at 0.02, rises by 0.02 each time a new EP is made, capped at 0.20.
- MT4/MT5 defaults: Step 0.02, Maximum 0.2.
- When price touches SAR, SAR flips to the other side and AF resets to 0.02, starting from the previous leg's EP.
The further the trend runs and the more new extremes it makes, the bigger AF grows, so SAR chases price along a curve — hence "parabolic". See the chart below.
Gold in an uptrend: SAR = 1,980, EP = 2,000, AF = 0.02. Next SAR = 1,980 + 0.02 × (2,000 − 1,980) = 1,980 + 0.4 = 1,980.4
Suppose the next candle makes a new high at 2,010 → EP = 2,010 and AF rises to 0.04. Next SAR = 1,980.4 + 0.04 × (2,010 − 1,980.4) = 1,980.4 + 0.04 × 29.6 = 1,980.4 + 1.184 ≈ 1,981.58 As AF grows, SAR moves toward price faster and faster.
How traders use it
- Current direction — dots below price = long side; dots above = short side.
- Trailing stop — use the SAR value as the stop for an open trade. See Trailing stops. The stop moves by formula, not by feelings.
- Flip signal — a flip to the other side signals closing the trade (and, in the original always-in system, opening the opposite one).
Typical entry and exit rules
Because the original SAR system is always in the market, which hurts badly in ranges, most traders add a filter:
- Use a trend filter, e.g. ADX above 25 or price above the 200 EMA. See ADX and DMI.
- Buy when SAR flips below price in the direction of the filter.
- Initial stop = the SAR value at entry.
- Move the stop to the new SAR each candle; exit when price touches SAR.
- Do not reverse automatically unless the filter confirms the other side.
The 200 EMA points up and SAR flips below price. Buy 1.0850; SAR at entry = 1.0825 → a 25-pip stop. At 0.08 lot (1 pip = $0.80), risk = 25 × 0.80 = $20, 1% of a $2,000 account. Price rallies, SAR climbs behind it to 1.0880, then price dips and touches SAR. The trade closes at 1.0880. Profit = 30 pips × 0.80 = $24 (before spread and commission).
Weaknesses and common mistakes
- Breaks down in ranges — price tags SAR on both sides in turn. Reversing every time produces a run of losses. This is its biggest weakness.
- Too tight late in a long trend — as AF nears 0.20, SAR hugs price, and a normal pullback can stop you out before the trend is over.
- The entry SAR can be far away — after a flip, SAR starts from the previous leg's extreme, which may be far from price. Size the trade from the real distance.
- Tweaking the step on a whim — a smaller step (e.g. 0.01) slows SAR, holds trades longer and gives back more profit; a bigger step does the opposite. No value suits every market.
- Ignoring gaps — price can gap over the SAR level, so your actual exit can be worse than the SAR value.
Reversing on every flip keeps you in the market all the time, including in ranges where you have no edge. Many traders use SAR only as an exit, not as an entry.
On a phone
MT4/MT5 mobile: tap f → Trend → Parabolic SAR (Step 0.02, Maximum 0.2). Long-press near the latest candle to read the dot's value, then move your stop on the open trade by hand — the mobile app will not trail it to SAR for you.
Summary
- SAR is a trailing dot: SAR + AF × (EP − SAR), with AF from 0.02 to 0.20.
- Dots below price = long, above = short; a touch means stop and reverse.
- It is most useful as a trailing stop in trending markets.
- It fails in ranges, so add a trend filter and do not reverse on every flip.
- The stop at entry can be wide; size the trade from the real distance.

